Knowledge about generators

COMPANY UPDATES

Factory Video

Contact Us

Solution Of Diesel Generator Glitch!

Radiator tubes leakage During the diesel generator working, the water temperature inside the radiator is too high and the outside temperature is too low. Or because of the vibration of the diesel generator, it is easy to cause the radiator tubes to leak. If it leaks, can put loose tobacco into the radiator, and use the pressure of the water circulation to plug the

Read More »

Add Coolant To The Generator Radiator

1. Adding coolant to the cooling system, make sure that the drain cover is closed and the drain plug is in the correct position. 2. Do not add coolant to the system too quickly to avoid the formation of air bubbles in the system. 3. The air must be exhausted

Read More »

Diesel Generator Sets Suddenly Shut Down

Diesel generator set operation process suddenly stalled, will greatly affect the output efficiency of the unit, serious delays in the process of production, bringing huge economic losses, then the diesel generator set suddenly stalled what is the reason? 1. Occurred when the automatic shutdown, the speed gradually reduced diesel generator

Read More »

Intercooler Cleaning

1. Switch the inlet and outlet switch valves to the corresponding ducts of the washing tank, and add the 2% soda ash aqueous solution into the intercooler, the temperature of the aqueous solution is 70-80℃, fill it up, wait 15 minutes to observe the intercooler If there are any leaks inside, disassemble

Read More »

Damage of Long-term Non-maintenance

Diesel generators need to be maintained regularly. What damage will cause if they can not be maintained regularly? 1. Battery: if the battery is not protected for a long time, the electrolyte water evaporation will not be timely compensation, not equipped with a start battery charger, battery long-term natural discharge power

Read More »

Generator Radiator Scale

During the diesel generator working, scale will be generated in the radiator. If scale is too much, debris will block the radiator, and it is easy to ignite incorrectly, which will cause the generator to overheat and decrease the thermal conductivity, which will directly affect the heat dissipation effect reduce the

Read More »

SEND A MESSAGE

Powered by Joinchat